Parts and services (Sold Separately) needed to complete 1 assembly :
Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results.
- Order: FIXED JAW CLEVIS WITH 1x19 CABLE for straight runs and runs with slight bends or Order: FIXED JAW CLEVIS WITH 7x7 CABLE for runs that have 90 degree corners. A FIXED JAW CLEVIS is "fixed" at one end of the cable by pre-swaging (no charge) at the factory and is not to be swaged by hand in the field.
- Order: 1 FineLine™ JAW TURNBUCKLE + 2 LAG EYENote: For all Assembly lengths >50' (70' max) and/or runs from 0-70' with more than 1 90 degree corner, it is recommended to omit the FIXED JAW CLEVIS WITH CABLE and use 2 FineLine™ JAW TURNBUCKLES instead to allow cable tightening at both ends of your run. In this situation, substitute the FIXED JAW CLEVIS WITH CABLE with STAINLESS CABLE
- Order: CABLE CUTTER + CABLE CRIMPER tools to hand swage your wire rope assemblies.
We recommend applying Citrisurf 77 Plus
to all exposed stainless steel components at the time of installation. In addition, apply Boeshield T9
if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page
Need help designing your railing project or an estimate? Email drawings(non-technical OK) to us at:
and we will respond within 24 hours. See the WORKSHEETS
tab for additional resources or just phone/fax us at 1-888-686-7245 (RAIL)
. We are happy to help!