Our line of Round Marine Grade Stainless Steel Posts
offers not only a shape alternative to our square posts, but also boasts the naturally sturdier structure of a cylindrical design. Use as intermediate posts in your cable railing run.Details:
- Brushed Finish 316 Marine Grade Stainless Steel Intermediate Post
- Dimensions: 2in OD with 1.6mm wall thickness. For Cable Railing Systems at 42in Rail Height
- Un-Drilled for Deck Mounting on Angled (Stair/Ramp) Surfaces
See Diagram above for possible Drilling configuration.
If PROFESSIONAL SWAGING SERVICE
is used at both ends of the cable run: Use DECK OR FASCIA MOUNT TERMINAL POSTS
for every post in your rail, including double offset posts at the corners. This will allow the attached fitting to pass through every post in the system.
If HAND SWAGING
your assemblies (RECOMMENDED)
: Minimum of 2 DECK OR FASCIA MOUNT TERMINAL POSTS
are required for each cable run (wherever your cable begins and ends). If your cable run also has 90 degree corners, use double INTERMEDIATE POSTS
at each corner. Use DECK OR FASCIA MOUNT INTERMEDIATE POSTS
spaced evenly (4' Max) for the remainder of the posts. CABLE CRIMPERS
and CABLE CUTTERS
are required.Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results.
We recommend applying Passivator
to all exposed stainless steel components at the time of installation. In addition, apply Boeshield T9
if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page
For design assistance, call us any time at 1-888-686-7245 (RAIL)
or email email@example.com
. Fax us a sketch or fill out the ESTIMATE REQUEST FORM
for a free estimate. You might also want to check out our cable railing videos