Our line of
Square Stainless Steel Posts offers the classic square shape of our aluminum line with the polished aesthetic and durability of Marine-Grade stainless steel.
The drilled posts sold on this page are for flat runs. For stair runs, buy undrilled or call us for angled hole drilling.
Square Stainless Steel Intermediate Post
Dimensions: 2" x 2" square with 2mm wall thickness
Intended for 36" Deck Mounted Railing System
Material: 316 marine grade stainless
Drilled Hole Specifications
Qty: 11 drilled holes
Size: 1/4in thru
Spacing: 3in from bottom of post
PROFESSIONAL SWAGING SERVICE is used at both ends of the cable run: Use
DECK OR FASCIA MOUNT TERMINAL POSTS for every post in your rail, including double offset posts at the corners. This will allow the attached fitting to pass through every post in the system.
HAND SWAGING your assemblies
(RECOMMENDED): Minimum of
2 DECK OR FASCIA MOUNT TERMINAL POSTS are required for each cable run (wherever your cable begins and ends). If your cable run also has 90 degree corners, use double
INTERMEDIATE POSTS at each corner. Use
DECK OR FASCIA MOUNT INTERMEDIATE POSTS spaced evenly (4' Max) for the remainder of the posts.
CABLE CRIMPERS and
CABLE CUTTERS are required.
Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. We recommend applying
Passivator to all exposed stainless steel components at the time of installation. In addition, apply
Rust Rescue if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our
Cleaning & Maintenance Page.
For design assistance, call us any time at
1-888-686-7245 (RAIL) or email
firstname.lastname@example.org. Fax us a sketch or fill out the
ESTIMATE REQUEST FORM for a free estimate. You might also want to check out our
cable railing videos and
Product # 987951, 714430, & 714447