Our line of Square Stainless Steel Posts
offers the classic square shape of our aluminum line with the polished aesthetic and durability of Marine-Grade stainless steel. This terminal post has extra thick walls for increased strength.The drilled posts sold on this page are for flat runs.
For stair runs, buy undrilled or call us for angled hole drilling.
- Square Stainless Steel Terminal Post
- Dimensions: 2" x 2" square with 5mm wall thickness
- Intended for 42" Deck Mounted Railing System
- Material: 316 marine grade stainless
- Drilled Hole Specifications
Qty: 13 drilled holes
Size: 21/64in thru
Spacing: 3in from bottom of post
If PROFESSIONAL SWAGING SERVICE
is used at both ends of the cable run: Use DECK OR FASCIA MOUNT TERMINAL POSTS
for every post in your rail, including double offset posts at the corners. This will allow the attached fitting to pass through every post in the system.
If HAND SWAGING
your assemblies (RECOMMENDED)
: Minimum of 2 DECK OR FASCIA MOUNT TERMINAL POSTS
are required for each cable run (wherever your cable begins and ends). If your cable run also has 90 degree corners, use double INTERMEDIATE POSTS
at each corner. Use DECK OR FASCIA MOUNT INTERMEDIATE POSTS
spaced evenly (4' Max) for the remainder of the posts. CABLE CRIMPERS
and CABLE CUTTERS
are required.Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results.
We recommend applying Passivator
to all exposed stainless steel components at the time of installation. In addition, apply Rust Rescue
if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page
For design assistance, call us any time at 1-888-686-7245 (RAIL)
or email firstname.lastname@example.org
. Fax us a sketch or fill out the ESTIMATE REQUEST FORM
for a free estimate. You might also want to check out our cable railing videos
.Product # 988026, 714492, & 714508